المواصفات الفنية لمهمات شبكات التوزيع
- 01 - الموزعات SWITCH BOARD (X) PANELS
- 02 - لوحات الجهد المتوسط والمنخفض RMU &L.V PANELS
- 03 - كابلات MV / L.V UNDERGROUND CABLES
- 04 - موصلات CONDUCTORS
- 06 - اسلاكSINGLE CORE PVC INSULATED CABLES/WIRES 450/750 V
- 07 - اكشاك KIOSKS
- 08 - محولات TRANSFORMERS
- 09 - أعمدة POLES &TOWERS
- 10 - عازلات INSULATORS
- 11 - مانعات الصواعق SURGE ARRESTER
- 12 - منظمات الجهد VOLTAGE REGULATORS
- 13 - نهايات CONNECTORS
- 14 - وصلات
- 15 -ملحقات كابلات LUGS&BTS
- 17 - محولات التيار والجهد CURRENT &VOLTAGE TRANSFORMERS
- 18 - ملحقات هوائية ACCESSORIES
- 19 - قواطع تيار LOW VOLTAGE CIRCUIT BREAKER AND FUSES
- 20 - العدادات METERS
- 21 - مكثفات CAPACITORS
- 22 - لمبات وكشافات TUBE &OUT DOOR LED LUMINARIES
- 23-EESS& مولدات GENERATORS
- 24 - طاقة شمسية PHOTOVOLTAIC SYSTEM
- 25 - ملحقات المحولات
- 26 - مقاوم التأريض المحايد EARTHING TOOLS
- 27 - شواحن بطاريات BATTERY CHARGERS
- 28 - عدد وأدوات TOOLS & EQUIPMENTS
- 29 - مواد الحماية COATING MATERIALS
- 30-مهمات السلامة والصحة المهنية SAFETY AND PERSONAL PROTECTIVE,HEALTHY EQUIPMENTS ,
- 31-أجهزة اختبار الكابلات CABLE TESTING EQUIPMENT
- 32- اجهزة INSTRUMENTS
08 - محولات TRANSFORMERS
-
EDMS 08-100-5 SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 10.5 - 11 / 0.4 kV
Technical Code: EDMS 08-100-5
Issued Date: 05/11/2024
SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 10.5 - 11 / 0.4 kV
-
EDMS 08-101-3 SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 10.5 – 11 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
Technical Code: EDMS 08-101-3
Issued Date: 08/08/2021
SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 10.5 – 11 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
-
EDMS 08-102-2 TECHNICAL SPECIFICATION FOR EPOXY SOLID-CAST/VPE OR CAST COIL DRY - TYPE DISTRIBUTION TRANSFORMERs 10.5-11/0.4 KV 50 KVA up to 5000 KVA
Technical Code: EDMS 08-102-2
Issued Date: 08/08/2023
TECHNICAL SPECIFICATION FOR EPOXY SOLID-CAST/VPE OR CAST COIL DRY - TYPE DISTRIBUTION TRANSFORMERs 10.5-11/0.4 KV 50 KVA up to 5000 KVA
-
EDMS 08-200-5 SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 22 / 0.4 kV
Technical Code: EDMS 08-200-5
Issued Date: 05/11/2024
SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 22 / 0.4 kV
-
EDMS 08-201-3 SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 22 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
Technical Code: EDMS 08-201-3
Issued Date: 08/08/2021
SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 22 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
-
EDMS 08-103-1 TECHNICAL SPECIFICATION FOR CAST /PRE-IMPREGNATED DRY - TYPE DISTRIBUTION TRANSFORMERS 10.5-11/0.4 KV 50 KVA up to 5000 KVA
Technical Code: EDMS 08-103-1
Issued Date: 01/01/0001
This specification covers the minimum technical requirements for design, engineering, manufacturing, testing, inspection, supply, delivery, packing, and installation, of three-phase solidcast resin/pre-impregnated coil (10.5-11/0.4KV) dry-type transformers for indoor installations for 50 HZ rated frequency network
-
EDMS 08-400-02 SPECIFICATION FOR Oil Immersed Coupling Power Transformers
Technical Code: EDMS 08-400-02
Issued Date: 01/10/2024
This specification covers the general requirements of design, manufacture, testing, supply and delivery of (22/11 KV or 11/22 KV), three-phase, two-windings oil immersed (Step-up or Step-down) power transformers with on load tap changer and local / remote tap change control panels rated up to 30 MVA at (ONAN/ONAF) Cooling. The transformers shall be suitable for indoor /outdoor installations of the power networks of Egyptian Electricity Distribution Companies (…EDCs).
EDMS 08-101-3 SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 10.5 – 11 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL تحميل
This specification specifies the minimum technical requirements for design,
manufacturing, testing, inspection, supply and delivery of three-phase epoxy solid-cast
resin coil, two-winding dry-type distribution transformers. The required transformers
are step-down transformers to convert the medium voltage level (10.5 kV or 11 kV) into
low voltage level 0.4 kV. The transformers shall be suitable for indoor installations of
the power networks of Egyptian Electricity Distribution Companies (EDCs).