المواصفات الفنية لمهمات شبكات التوزيع
- 01 - SWITCH BOARD (X) PANELS
- 02 - RMU &L.V PANELS
- 03 - MV / L.V UNDERGROUND CABLES
- 04 - CONDUCTORS
- 06 -SINGLE CORE PVC INSULATED CABLES/WIRES 450/750 V
- 07 - KIOSKS
- 08 - TRANSFORMERS
- 09 - POLES &TOWERS
- 10 - INSULATORS
- 11 - SURGE ARRESTER
- 12 - VOLTAGE REGULATORS
- 13 - TERMINATIONS
- 14 - JOINTS
- 15 - LUGS&BTS
- 17 - CURRENT &VOLTAGE TRANSFORMERS
- 18 - ACCESSORIES
- 19 - LOW VOLTAGE CIRCUIT BREAKER AND FUSES
- 20 - METERS
- 21 - CAPACITORS
- 22 - TUBE &OUT DOOR LED LUMINARIES
- 23-EESS& GENERATORS
- 24 - PHOTOVOLTAIC SYSTEM
- 25 -TRANSFORMERS FITTINGS
- 26 - EARTHING TOOLS
- 27 - BATTERY CHARGERS
- 28 - TOOLS & EQUIPMENTS
- 29 - COATING MATERIALS
- 30- SAFETY AND PERSONAL PROTECTIVE,HEALTHY EQUIPMENTS ,
- 31-أجهزة اختبار الكابلات CABLE TESTING EQUIPMENT
- 32- اجهزة INSTRUMENTS
13 - TERMINATIONS
-
EDMS 13-101-2 SPECIFICATION FOR DEADBREAK ELBOW 12/20 (24 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
Technical Code: EDMS 13-101-2
Issued Date: 03/02/2026
SPECIFICATION FOR DEADBREAK ELBOW 12/20 (24 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
-
EDMS 13-201-2 SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
Technical Code: EDMS 13-201-2
Issued Date: 03/02/2026
SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
-
EDMS 13-100-3 SPECIFICATION FOR CABLE TERMINATIONS FOR XLPE INSULATED CABLES 12/20 (24) KV (INDOR/OUTDOOR)
Technical Code: EDMS 13-100-3
Issued Date: 06/05/2025
SPECIFICATION FOR CABLE TERMINATIONS FOR XLPE INSULATED CABLES 12/20 (24) KV (INDOR/OUTDOOR)
-
EDMS 13-200-3 SPECIFICATION FOR CABLE TERMINATIONS FOR XLPE INSULATED CABLES 18/30 (36) KV (INDOR/OUTDOOR)
Technical Code: EDMS 13-200-3
Issued Date: 06/05/2025
EDMS 13-201-2 SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES) تحميل
This specification describes the minimum technical requirements for design,
manufacturing, testing, inspection, packing, and delivery of deadbreak elbow connectors
(screened separable insulated connectors). The required elbows are intended to suit
18/30 (36 kV) cables inside the medium voltage distribution networks of the Egyptian
Electricity Distribution Companies (EDCs). This specification covers both (L-shape)
and (T-shape) elbows.