المواصفات الفنية لمهمات شبكات التوزيع
- 01 - الموزعات
- 02 - لوحات الجهد المتوسط والمنخفض
- 03 - كابلات
- 04 - موصلات
- 06 - كابلات جهد منخفض احادية معزولة
- 07 - اكشاك
- 08 - محولات
- 09 - أعمدة
- 10 - عازلات
- 11 - مانعات الصواعق
- 12 - منظمات الجهد
- 13 - نهايات
- 14 - وصلات
- 15 -ملحقات كابلات
- 17 - محولات التيار والجهد
- 18 - ملحقات هوائية
- 19 - قواطع تيار
- 20 - العدادات
- 21 - مكثفات
- 22 - لمبات وكشافات
- 23-مولدات
- 24 - طاقة شمسية
- 25 - ملحقات المحولات
- 26 - مقاوم التأريض المحايد
- 27 - شواحن بطاريات
- 28 - عدد وأدوات
- 29 - مواد الحماية
- 30-مهمات السلامة والصحة المهنية
- 32- اجهزة تحليل الطاقة
18 - ملحقات هوائية
-
EDMS 18-301-1 SPECIFICATION FOR Low voltage insulation fittings
Technical Code: EDMS 18-301-1
Issued Date: 30/08/2018
SPECIFICATION FOR Low voltage insulation fittings
-
EDMS 18- 400 - 2 SPECIFICATION FOR Tension set assembly For M.V. overhead network ( 4 - BOLT TYPE)
Technical Code: EDMS 18- 400 - 2
Issued Date: 10/12/2018
SPECIFICATION FOR Tension set assembly For M.V. overhead network ( 4 - BOLT TYPE)
-
EDMS 18- 401 - 2 SPECIFICATION FOR Tension set assembly For M.V. overhead network ( 3 - BOLT TYPE)
Technical Code: EDMS 18- 401 - 1
Issued Date: 28/06/2022
SPECIFICATION FOR Tension set assembly For M.V. overhead network ( 3 - BOLT TYPE)
EDMS 18-301-1 SPECIFICATION FOR Low voltage insulation fittings تحميل
This specification is applicable to the different insulation fittings designed for low
voltage insulated conductors (up to 1 KV/AC) for main and branch distribution networks.
● This standard specification specifies the main characteristics of the insulating fittings and
the tests they shall comply with according to NFC-33.
● The insulating fittings comprise the following :
- Suspension clamps.
- Insulated piercing clamps.
- Dead end clamps "Anchoring Device".
- Pre-insulated junction sleeves.
- Service dead – end clamps (clamp comprises)…….. (option).
● Unless Otherwise specified, it should be according to IEC60998/NFC-33.